Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 7.0-CURRENT #1: Wed Mar 22 11:59:52 CET 2006
    thiemo@lightspeed.ham01.thiemo.net:/usr/src/sys/i386/compile/LIGHTSPEED
ACPI APIC Table: <PTLTD  	 APIC  >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Turion(tm) 64 Mobile Technology ML-37 (1989.82-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x20f42  Stepping = 2
  Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  Features2=0x1<SSE3>
  AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow+,3DNow>
  AMD Features2=0x1<LAHF>
real memory  = 1072627712 (1022 MB)
avail memory = 1040609280 (992 MB)
    ACPI-0390: *** Info: Table [SSDT] replaced by host OS
ACPI: overriding DSDT/SSDT with custom table
    ACPI-0390: *** Info: Table [DSDT] replaced by host OS
ioapic0 <Version 2.1> irqs 0-23 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD   RSDT> on motherboard
acpi0: Overriding SCI Interrupt from IRQ 9 to IRQ 21
acpi0: Power Button (fixed)
unknown: I/O range not supported
acpi_ec0: <Embedded Controller: GPE 0x10> port 0x62,0x66 on acpi0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0x9000-0x90ff mem 0xc8000000-0xcfffffff,0xc0100000-0xc010ffff irq 18 at device 0.0 on pci1
pcib2: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci5: <ACPI PCI bus> on pcib2
bge0: <Broadcom BCM5789 Gigabit Ethernet, ASIC rev. 0x4101> mem 0xc0200000-0xc020ffff irq 18 at device 0.0 on pci5
miibus0: <MII bus> on bge0
brgphy0: <BCM5750 10/100/1000baseTX PHY> on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
bge0: Ethernet address: 00:c0:9f:ff:45:40
ohci0: <ATI SB400 USB Controller> mem 0xc0000000-0xc0000fff irq 19 at device 19.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <ATI SB400 USB Controller> on ohci0
usb0: USB revision 1.0
uhub0: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 4 ports with 4 removable, self powered
ohci1: <ATI SB400 USB Controller> mem 0xc0001000-0xc0001fff irq 19 at device 19.1 on pci0
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <ATI SB400 USB Controller> on ohci1
usb1: USB revision 1.0
uhub1: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 4 ports with 4 removable, self powered
ehci0: <ATI SB400 USB 2.0 controller> mem 0xc0002000-0xc0002fff irq 19 at device 19.2 on pci0
ehci0: [GIANT-LOCKED]
usb2: EHCI version 1.0
usb2: companion controllers, 4 ports each: usb0 usb1
usb2: <ATI SB400 USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: <ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2
uhub2: 8 ports with 8 removable, self powered
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci0: <ATI IXP400 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x8410-0x841f at device 20.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci6: <ACPI PCI bus> on pcib3
pci6: <network> at device 2.0 (no driver attached)
cbb0: <TI6411 PCI-CardBus Bridge> mem 0xc0308000-0xc0308fff irq 23 at device 9.0 on pci6
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
fwohci0: <1394 Open Host Controller Interface> mem 0xc0309000-0xc03097ff,0xc0300000-0xc0303fff irq 21 at device 9.2 on pci6
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:c0:9f:00:00:7c:e4:52
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:c0:9f:7c:e4:52
fwe0: Ethernet address: 02:c0:9f:7c:e4:52
fwe0: if_start running deferred for Giant
fwohci0: Initiate bus reset
fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
pci6: <mass storage> at device 9.3 (no driver attached)
pci0: <multimedia, audio> at device 20.5 (no driver attached)
pci0: <simple comms, generic modem> at device 20.6 (no driver attached)
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
sio0 port 0x2f8-0x2ff irq 3 drq 1 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FAST]
sio1: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 on acpi0
sio1: type 16550A
sio1: [FAST]
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppc0: [GIANT-LOCKED]
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xe0000-0xe3fff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1989822185 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 95396MB <Seagate ST9100823A 3.01> at ata0-master UDMA100
acd0: DVDR <MATSHITADVD-RAM UJ-845S/D201> at ata1-master UDMA33
cd0 at ata1 bus 0 target 0 lun 0
cd0: <MATSHITA DVD-RAM UJ-845S D201> Removable CD-ROM SCSI-0 device 
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/ad0s1a
ums0: <vendor 0x1241 product 0x1177, class 0/0, rev 1.10/2.00, addr 2> on uhub1
ums0: 3 buttons and Z dir.
WARNING: attempt to net_add_domain(bluetooth) after domainfinalize()
bge0: link state changed to DOWN
bge0: link state changed to UP
ums0: at uhub1 port 1 (addr 2) disconnected
ums0: detached