Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-CURRENT-20100118 #7: Thu Jan 21 14:24:21 CET 2010
    root@amnesiac.secnetix.de:/usr/obj/usr/src/sys/TEST amd64
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80ea8000.
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2266763316 Hz
CPU: Intel(R) Xeon(R) CPU           L5520  @ 2.27GHz (2266.76-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x106a5  Stepping = 5
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x9ce3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT>
  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant
real memory  = 34359738368 (32768 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x0000000000097fff, 618496 bytes (151 pages)
0x0000000000ef4000 - 0x000000007d78bfff, 2089385984 bytes (510104 pages)
0x000000007d83c000 - 0x000000007f68efff, 31797248 bytes (7763 pages)
0x000000007f7ff000 - 0x000000007f7fffff, 4096 bytes (1 pages)
0x0000000100000000 - 0x0000000840170fff, 31140024320 bytes (7602545 pages)
avail memory = 33100660736 (31567 MB)
ACPI APIC Table: <IBM    BLADE   >
INTR: Adding local APIC 1 as a target
INTR: Adding local APIC 2 as a target
INTR: Adding local APIC 3 as a target
INTR: Adding local APIC 4 as a target
INTR: Adding local APIC 5 as a target
INTR: Adding local APIC 6 as a target
INTR: Adding local APIC 7 as a target
INTR: Adding local APIC 16 as a target
INTR: Adding local APIC 17 as a target
INTR: Adding local APIC 18 as a target
INTR: Adding local APIC 19 as a target
INTR: Adding local APIC 20 as a target
INTR: Adding local APIC 21 as a target
INTR: Adding local APIC 22 as a target
INTR: Adding local APIC 23 as a target
FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs
FreeBSD/SMP: 2 package(s) x 4 core(s) x 2 SMT threads
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
 cpu4 (AP): APIC ID:  4
 cpu5 (AP): APIC ID:  5
 cpu6 (AP): APIC ID:  6
 cpu7 (AP): APIC ID:  7
 cpu8 (AP): APIC ID: 16
 cpu9 (AP): APIC ID: 17
 cpu10 (AP): APIC ID: 18
 cpu11 (AP): APIC ID: 19
 cpu12 (AP): APIC ID: 20
 cpu13 (AP): APIC ID: 21
 cpu14 (AP): APIC ID: 22
 cpu15 (AP): APIC ID: 23
APIC: CPU 0 has ACPI ID 0
APIC: CPU 1 has ACPI ID 8
APIC: CPU 2 has ACPI ID 1
APIC: CPU 3 has ACPI ID 9
APIC: CPU 4 has ACPI ID 2
APIC: CPU 5 has ACPI ID 10
APIC: CPU 6 has ACPI ID 3
APIC: CPU 7 has ACPI ID 11
APIC: CPU 8 has ACPI ID 4
APIC: CPU 9 has ACPI ID 12
APIC: CPU 10 has ACPI ID 5
APIC: CPU 11 has ACPI ID 13
APIC: CPU 12 has ACPI ID 6
APIC: CPU 13 has ACPI ID 14
APIC: CPU 14 has ACPI ID 7
APIC: CPU 15 has ACPI ID 15
ULE: setup cpu 0
ULE: setup cpu 1
ULE: setup cpu 2
ULE: setup cpu 3
ULE: setup cpu 4
ULE: setup cpu 5
ULE: setup cpu 6
ULE: setup cpu 7
ULE: setup cpu 8
ULE: setup cpu 9
ULE: setup cpu 10
ULE: setup cpu 11
ULE: setup cpu 12
ULE: setup cpu 13
ULE: setup cpu 14
ULE: setup cpu 15
ACPI: RSDP 0xfdfd0 00024 (v2 IBM   )
ACPI: XSDT 0x7f7fe120 0008C (v1 IBM    BLADE    00000000      01000013)
ACPI: FACP 0x7f7fb000 000F4 (v4 IBM    BLADE    00000000 IBM  01000013)
ACPI Warning: Invalid length for Pm1aControlBlock: 32, using default 16 (20091214/tbfadt-707)
ACPI: DSDT 0x7f7f8000 02159 (v1 IBM    BLADE    00000003 IBM  01000013)
ACPI: FACS 0x7f735000 00040
ACPI: TCPA 0x7f7fd000 00064 (v0                 00000000      00000000)
ACPI: APIC 0x7f7f7000 000DE (v2 IBM    BLADE    00000000 IBM  01000013)
ACPI: MCFG 0x7f7f6000 0003C (v1 IBM    BLADE    00000001 IBM  01000013)
ACPI: SLIC 0x7f7f5000 00176 (v1 IBM    BLADE    00000000 IBM  01000013)
ACPI: HPET 0x7f7f4000 00038 (v1 IBM    BLADE    00000001 IBM  01000013)
ACPI: SRAT 0x7f7f3000 001A8 (v2 IBM    BLADE    00000001 IBM  01000013)
ACPI: SLIT 0x7f7f2000 00030 (v1 IBM    BLADE    00000000 IBM  01000013)
ACPI: SSDT 0x7f7f1000 00113 (v2 IBM    CPUSCOPE 00004000 IBM  01000013)
ACPI: SSDT 0x7f7ef000 01404 (v2 IBM    PSTATEPM 00004000 IBM  01000013)
ACPI: SSDT 0x7f7ee000 00A3A (v2 IBM    CPUCSTAT 00004000 IBM  01000013)
ACPI: ERST 0x7f7ed000 00230 (v1 IBM    BLADE    00000001 IBM  01000013)
ACPI: DMAR 0x7f7ec000 000D8 (v1 IBM    BLADE    00000001 IBM  01000013)
MADT: Found IO APIC ID 8, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
MADT: Found IO APIC ID 9, Interrupt 24 at 0xfec80000
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
lapic: Routing NMI -> LINT1
lapic: LINT1 trigger: edge
lapic: LINT1 polarity: high
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
cpu0 BSP:
     ID: 0x00000000   VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
wlan: <802.11 Link Layer>
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
nfslock: pseudo-device
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
io: <I/O>
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
acpi0: <IBM BLADE> on motherboard
PCIe: Memory Mapped configuration base @ 0x80000000
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
AcpiOsDerivePciId: \\_SB_.PCI0.LPC0.PRR0 -> bus 0 dev 31 func 0
AcpiOsDerivePciId: \\_SB_.PCI0.LPC0.PRR1 -> bus 0 dev 31 func 0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
acpi_hpet0: vend: 0x8086 rev: 0x1 num: 3 hz: 14318180 opts: legacy_route 64-bit
Timecounter "HPET" frequency 14318180 Hz quality 900
ACPI timer: 1/0 1/1 1/0 1/1 1/1 1/0 1/1 1/0 1/2 1/0 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x588-0x58b on acpi0
pci_link0:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  3 4 5 6 7 9 10 11 12 14 15
  Validation          0   11   N     0  3 4 5 6 7 9 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 6 7 9 10 11 12 14 15
pci_link1:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  3 4 5 6 7 9 10 11 12 14 15
  Validation          0   10   N     0  3 4 5 6 7 9 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 6 7 9 10 11 12 14 15
pci_link2:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   15   N     0  3 4 5 6 7 9 10 11 12 14 15
  Validation          0   15   N     0  3 4 5 6 7 9 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 6 7 9 10 11 12 14 15
pci_link3:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    5   N     0  3 4 5 6 7 9 10 11 12 14 15
  Validation          0    5   N     0  3 4 5 6 7 9 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 6 7 9 10 11 12 14 15
pci_link4:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  3 4 5 6 7 9 10 11 12 14 15
  Validation          0  255   N     0  3 4 5 6 7 9 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 6 7 9 10 11 12 14 15
pci_link5:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  3 4 5 6 7 9 10 11 12 14 15
  Validation          0   11   N     0  3 4 5 6 7 9 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 6 7 9 10 11 12 14 15
pci_link6:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  3 4 5 6 7 9 10 11 12 14 15
  Validation          0   11   N     0  3 4 5 6 7 9 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 6 7 9 10 11 12 14 15
pci_link7:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  3 4 5 6 7 9 10 11 12 14 15
  Validation          0  255   N     0  3 4 5 6 7 9 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 6 7 9 10 11 12 14 15
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found->	vendor=0x8086, dev=0x3406, revid=0x13
	domain=0, bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0040, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 3  supports D0 D3  current D0
	MSI supports 2 messages, vector masks
pcib0: matched entry for 0.0.INTA
pcib0: slot 0 INTA hardwired to IRQ 16
found->	vendor=0x8086, dev=0x3408, revid=0x13
	domain=0, bus=0, slot=1, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0047, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 3  supports D0 D3  current D0
	MSI supports 2 messages, vector masks
pcib0: matched entry for 0.1.INTA
pcib0: slot 1 INTA hardwired to IRQ 28
found->	vendor=0x8086, dev=0x340a, revid=0x13
	domain=0, bus=0, slot=3, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0047, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 3  supports D0 D3  current D0
	MSI supports 2 messages, vector masks
pcib0: matched entry for 0.3.INTA
pcib0: slot 3 INTA hardwired to IRQ 24
found->	vendor=0x8086, dev=0x340b, revid=0x13
	domain=0, bus=0, slot=4, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0047, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 3  supports D0 D3  current D0
	MSI supports 2 messages, vector masks
pcib0: matched entry for 0.4.INTA
pcib0: slot 4 INTA hardwired to IRQ 25
found->	vendor=0x8086, dev=0x340c, revid=0x13
	domain=0, bus=0, slot=5, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0040, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 3  supports D0 D3  current D0
	MSI supports 2 messages, vector masks
pcib0: matched entry for 0.5.INTA
pcib0: slot 5 INTA hardwired to IRQ 26
found->	vendor=0x8086, dev=0x340e, revid=0x13
	domain=0, bus=0, slot=7, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0047, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 3  supports D0 D3  current D0
	MSI supports 2 messages, vector masks
pcib0: matched entry for 0.7.INTA
pcib0: slot 7 INTA hardwired to IRQ 30
found->	vendor=0x8086, dev=0x340f, revid=0x13
	domain=0, bus=0, slot=8, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0040, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 3  supports D0 D3  current D0
	MSI supports 2 messages, vector masks
pcib0: matched entry for 0.8.INTA
pcib0: slot 8 INTA hardwired to IRQ 31
found->	vendor=0x8086, dev=0x3410, revid=0x13
	domain=0, bus=0, slot=9, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0040, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 3  supports D0 D3  current D0
	MSI supports 2 messages, vector masks
pcib0: matched entry for 0.9.INTA
pcib0: slot 9 INTA hardwired to IRQ 32
found->	vendor=0x8086, dev=0x3425, revid=0x13
	domain=0, bus=0, slot=16, func=0
	class=08-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x3426, revid=0x13
	domain=0, bus=0, slot=16, func=1
	class=08-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0000, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x3427, revid=0x13
	domain=0, bus=0, slot=17, func=0
	class=08-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x3428, revid=0x13
	domain=0, bus=0, slot=17, func=1
	class=08-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0000, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x342e, revid=0x13
	domain=0, bus=0, slot=20, func=0
	class=08-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x3422, revid=0x13
	domain=0, bus=0, slot=20, func=1
	class=08-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x3423, revid=0x13
	domain=0, bus=0, slot=20, func=2
	class=08-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x3438, revid=0x13
	domain=0, bus=0, slot=20, func=3
	class=08-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0000, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x342f, revid=0x13
	domain=0, bus=0, slot=21, func=0
	class=08-00-20, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0000, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x3430, revid=0x13
	domain=0, bus=0, slot=22, func=0
	class=08-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 3  supports D0 D3  current D0
	MSI-X supports 1 message in map 0x10
	map[10]: type Memory, range 64, base 0x97c00000, size 14, enabled
pcib0: matched entry for 0.22.INTA
pcib0: slot 22 INTA hardwired to IRQ 16
found->	vendor=0x8086, dev=0x3431, revid=0x13
	domain=0, bus=0, slot=22, func=1
	class=08-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=10
	powerspec 3  supports D0 D3  current D0
	MSI-X supports 1 message in map 0x10
	map[10]: type Memory, range 64, base 0x97c04000, size 14, enabled
pcib0: matched entry for 0.22.INTB
pcib0: slot 22 INTB hardwired to IRQ 17
found->	vendor=0x8086, dev=0x3432, revid=0x13
	domain=0, bus=0, slot=22, func=2
	class=08-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=15
	powerspec 3  supports D0 D3  current D0
	MSI-X supports 1 message in map 0x10
	map[10]: type Memory, range 64, base 0x97c08000, size 14, enabled
pcib0: matched entry for 0.22.INTC
pcib0: slot 22 INTC hardwired to IRQ 18
found->	vendor=0x8086, dev=0x3433, revid=0x13
	domain=0, bus=0, slot=22, func=3
	class=08-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=d, irq=5
	powerspec 3  supports D0 D3  current D0
	MSI-X supports 1 message in map 0x10
	map[10]: type Memory, range 64, base 0x97c0c000, size 14, enabled
pcib0: matched entry for 0.22.INTD
pcib0: slot 22 INTD hardwired to IRQ 19
found->	vendor=0x8086, dev=0x3429, revid=0x13
	domain=0, bus=0, slot=22, func=4
	class=08-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 3  supports D0 D3  current D0
	MSI-X supports 1 message in map 0x10
	map[10]: type Memory, range 64, base 0x97c10000, size 14, enabled
pcib0: matched entry for 0.22.INTA
pcib0: slot 22 INTA hardwired to IRQ 16
found->	vendor=0x8086, dev=0x342a, revid=0x13
	domain=0, bus=0, slot=22, func=5
	class=08-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=10
	powerspec 3  supports D0 D3  current D0
	MSI-X supports 1 message in map 0x10
	map[10]: type Memory, range 64, base 0x97c14000, size 14, enabled
pcib0: matched entry for 0.22.INTB
pcib0: slot 22 INTB hardwired to IRQ 17
found->	vendor=0x8086, dev=0x342b, revid=0x13
	domain=0, bus=0, slot=22, func=6
	class=08-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=15
	powerspec 3  supports D0 D3  current D0
	MSI-X supports 1 message in map 0x10
	map[10]: type Memory, range 64, base 0x97c18000, size 14, enabled
pcib0: matched entry for 0.22.INTC
pcib0: slot 22 INTC hardwired to IRQ 18
found->	vendor=0x8086, dev=0x342c, revid=0x13
	domain=0, bus=0, slot=22, func=7
	class=08-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=d, irq=5
	powerspec 3  supports D0 D3  current D0
	MSI-X supports 1 message in map 0x10
	map[10]: type Memory, range 64, base 0x97c1c000, size 14, enabled
pcib0: matched entry for 0.22.INTD
pcib0: slot 22 INTD hardwired to IRQ 19
found->	vendor=0x8086, dev=0x3a37, revid=0x00
	domain=0, bus=0, slot=26, func=0
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	map[20]: type I/O Port, range 32, base 0x3080, size  5, enabled
pcib0: matched entry for 0.26.INTA
pcib0: slot 26 INTA hardwired to IRQ 22
found->	vendor=0x8086, dev=0x3a3c, revid=0x00
	domain=0, bus=0, slot=26, func=7
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0146, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=11
	powerspec 2  supports D0 D3  current D0
	map[10]: type Memory, range 32, base 0x97c21400, size 10, enabled
pcib0: matched entry for 0.26.INTC
pcib0: slot 26 INTC hardwired to IRQ 16
found->	vendor=0x8086, dev=0x3a40, revid=0x00
	domain=0, bus=0, slot=28, func=0
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0040, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=5
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 20
found->	vendor=0x8086, dev=0x3a48, revid=0x00
	domain=0, bus=0, slot=28, func=4
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0047, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x0b (2750 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=5
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 20
found->	vendor=0x8086, dev=0x3a34, revid=0x00
	domain=0, bus=0, slot=29, func=0
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	map[20]: type I/O Port, range 32, base 0x3060, size  5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 17
found->	vendor=0x8086, dev=0x3a35, revid=0x00
	domain=0, bus=0, slot=29, func=1
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	map[20]: type I/O Port, range 32, base 0x3040, size  5, enabled
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 16
found->	vendor=0x8086, dev=0x3a36, revid=0x00
	domain=0, bus=0, slot=29, func=2
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=11
	map[20]: type I/O Port, range 32, base 0x3020, size  5, enabled
pcib0: matched entry for 0.29.INTC
pcib0: slot 29 INTC hardwired to IRQ 21
found->	vendor=0x8086, dev=0x3a3a, revid=0x00
	domain=0, bus=0, slot=29, func=7
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0146, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D3  current D0
	map[10]: type Memory, range 32, base 0x97c21000, size 10, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 17
found->	vendor=0x8086, dev=0x244e, revid=0x90
	domain=0, bus=0, slot=30, func=0
	class=06-04-01, hdrtype=0x01, mfdev=0
	cmdreg=0x0140, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x3a18, revid=0x00
	domain=0, bus=0, slot=31, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0147, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x3a30, revid=0x00
	domain=0, bus=0, slot=31, func=3
	class=0c-05-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0143, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	map[10]: type Memory, range 64, base 0x97c21800, size  8, enabled
	map[20]: type I/O Port, range 32, base 0x3000, size  5, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 22
pcib1: <PCI-PCI bridge> irq 28 at device 1.0 on pci0
pcib1:   domain            0
pcib1:   secondary bus     11
pcib1:   subordinate bus   15
pcib1:   I/O decode        0x2000-0x2fff
pcib1:   memory decode     0x97b00000-0x97bfffff
pcib1:   no prefetched decode
pci11: <PCI bus> on pcib1
pci11: domain=0, physical bus=11
found->	vendor=0x1000, dev=0x0056, revid=0x08
	domain=0, bus=11, slot=0, func=0
	class=01-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0047, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	MSI supports 1 message, 64 bit
	MSI-X supports 1 message in map 0x14
	map[10]: type I/O Port, range 32, base 0x2000, size  8, enabled
pcib1: requested I/O range 0x2000-0x20ff: in range
	map[14]: type Memory, range 64, base 0x97b10000, size 14, enabled
pcib1: requested memory range 0x97b10000-0x97b13fff: good
	map[1c]: type Memory, range 64, base 0x97b00000, size 16, enabled
pcib1: requested memory range 0x97b00000-0x97b0ffff: good
pcib0: matched entry for 0.1.INTA
pcib0: slot 1 INTA hardwired to IRQ 28
pcib1: slot 0 INTA is routed to irq 28
mpt0: <LSILogic SAS/SATA Adapter> port 0x2000-0x20ff mem 0x97b10000-0x97b13fff,0x97b00000-0x97b0ffff irq 28 at device 0.0 on pci11
ioapic1: routing intpin 4 (PCI IRQ 28) to lapic 0 vector 49
mpt0: [MPSAFE]
mpt0: [ITHREAD]
mpt0: MPI Version=1.5.20.0
mpt0: No Handlers For Any Event Notify Frames. Event 0xa (ACK not required).
mpt0: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required).
mpt0: No Handlers For Any Event Notify Frames. Event 0x12 (ACK not required).
mpt0: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required).
mpt0: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required).
mpt0: No Handlers For Any Event Notify Frames. Event 0x12 (ACK not required).
mpt0: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required).
mpt0: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required).
mpt0: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required).
mpt0: No Handlers For Any Event Notify Frames. Event 0xf (ACK not required).
mpt0: No Handlers For Any Event Notify Frames. Event 0xf (ACK not required).
mpt0: Capabilities: ( RAID-0 RAID-1E RAID-1 )
mpt0: 0 Active Volumes (2 Max)
mpt0: 0 Hidden Drive Members (14 Max)
mpt0: No Handlers For Any Event Notify Frames. Event 0xa (ACK not required).
pcib2: <PCI-PCI bridge> irq 24 at device 3.0 on pci0
pcib2:   domain            0
pcib2:   secondary bus     21
pcib2:   subordinate bus   25
pcib2:   I/O decode        0xf000-0xfff
pcib2:   memory decode     0x97a00000-0x97afffff
pcib2:   no prefetched decode
pci21: <PCI bus> on pcib2
pci21: domain=0, physical bus=21
found->	vendor=0x1166, dev=0x0103, revid=0xb5
	domain=0, bus=21, slot=0, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0047, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
pcib3: <PCI-PCI bridge> at device 0.0 on pci21
pcib3:   domain            0
pcib3:   secondary bus     22
pcib3:   subordinate bus   22
pcib3:   I/O decode        0xfffff000-0xfff
pcib3:   memory decode     0x97a00000-0x97afffff
pcib3:   no prefetched decode
pci22: <PCI bus> on pcib3
pci22: domain=0, physical bus=22
found->	vendor=0x14e4, dev=0x1679, revid=0xa3
	domain=0, bus=22, slot=4, func=0
	class=02-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0156, statreg=0x02b0, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
	MSI supports 8 messages, 64 bit
	map[10]: type Memory, range 64, base 0x97a00000, size 16, enabled
pcib3: requested memory range 0x97a00000-0x97a0ffff: good
pcib2: requested memory range 0x97a00000-0x97a0ffff: good
	map[18]: type Memory, range 64, base 0x97a10000, size 16, enabled
pcib3: requested memory range 0x97a10000-0x97a1ffff: good
pcib2: requested memory range 0x97a10000-0x97a1ffff: good
pcib0: matched entry for 0.3.INTA
pcib0: slot 3 INTA hardwired to IRQ 24
pcib2: slot 0 INTA is routed to irq 24
pcib3: slot 4 INTA is routed to irq 24
found->	vendor=0x14e4, dev=0x1679, revid=0xa3
	domain=0, bus=22, slot=4, func=1
	class=02-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0156, statreg=0x02b0, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=10
	powerspec 2  supports D0 D3  current D0
	MSI supports 8 messages, 64 bit
	map[10]: type Memory, range 64, base 0x97a20000, size 16, enabled
pcib3: requested memory range 0x97a20000-0x97a2ffff: good
pcib2: requested memory range 0x97a20000-0x97a2ffff: good
	map[18]: type Memory, range 64, base 0x97a30000, size 16, enabled
pcib3: requested memory range 0x97a30000-0x97a3ffff: good
pcib2: requested memory range 0x97a30000-0x97a3ffff: good
pcib0: matched entry for 0.3.INTB
pcib0: slot 3 INTB hardwired to IRQ 34
pcib2: slot 0 INTB is routed to irq 34
pcib3: slot 4 INTB is routed to irq 34
bge0: <Broadcom NetXtreme Gigabit Fiber Controller, ASIC rev. 0x009003> mem 0x97a00000-0x97a0ffff,0x97a10000-0x97a1ffff irq 24 at device 4.0 on pci22
bge0: attempting to allocate 1 MSI vectors (8 supported)
msi: routing MSI IRQ 256 to local APIC 0 vector 56
bge0: using IRQ 256 for MSI
bge0: CHIP ID 0x00009003; ASIC REV 0x09; CHIP REV 0x90; PCI-X
miibus0: <MII bus> on bge0
brgphy0: <BCM5714 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0: OUI 0x000818, model 0x0034, rev. 0
brgphy0:  1000baseSX-FDX, auto
bge0: bpf attached
bge0: Ethernet address: 00:21:5e:4c:95:72
bge0: [MPSAFE]
bge0: [ITHREAD]
bge1: <Broadcom NetXtreme Gigabit Fiber Controller, ASIC rev. 0x009003> mem 0x97a20000-0x97a2ffff,0x97a30000-0x97a3ffff irq 34 at device 4.1 on pci22
bge1: attempting to allocate 1 MSI vectors (8 supported)
msi: routing MSI IRQ 257 to local APIC 0 vector 64
bge1: using IRQ 257 for MSI
bge1: CHIP ID 0x00009003; ASIC REV 0x09; CHIP REV 0x90; PCI-X
miibus1: <MII bus> on bge1
brgphy1: <BCM5714 10/100/1000baseTX PHY> PHY 1 on miibus1
brgphy1: OUI 0x000818, model 0x0034, rev. 0
brgphy1:  1000baseSX-FDX, auto
bge1: bpf attached
bge1: Ethernet address: 00:21:5e:4c:95:73
bge1: [MPSAFE]
bge1: [ITHREAD]
pcib4: <PCI-PCI bridge> irq 25 at device 4.0 on pci0
pcib4:   domain            0
pcib4:   secondary bus     26
pcib4:   subordinate bus   30
pcib4:   I/O decode        0x1000-0x1fff
pcib4:   memory decode     0x97900000-0x979fffff
pcib4:   no prefetched decode
pci26: <PCI bus> on pcib4
pci26: domain=0, physical bus=26
found->	vendor=0x1077, dev=0x2432, revid=0x03
	domain=0, bus=26, slot=0, func=0
	class=0c-04-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0047, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
	MSI supports 16 messages, 64 bit
	MSI-X supports 16 messages in map 0x14
	map[10]: type I/O Port, range 32, base 0x1200, size  8, enabled
pcib4: requested I/O range 0x1200-0x12ff: in range
	map[14]: type Memory, range 64, base 0x97900000, size 14, enabled
pcib4: requested memory range 0x97900000-0x97903fff: good
pcib0: matched entry for 0.4.INTA
pcib0: slot 4 INTA hardwired to IRQ 25
pcib4: slot 0 INTA is routed to irq 25
found->	vendor=0x1077, dev=0x2432, revid=0x03
	domain=0, bus=26, slot=0, func=1
	class=0c-04-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0047, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=10
	powerspec 2  supports D0 D3  current D0
	MSI supports 16 messages, 64 bit
	MSI-X supports 16 messages in map 0x14
	map[10]: type I/O Port, range 32, base 0x1000, size  8, enabled
pcib4: requested I/O range 0x1000-0x10ff: in range
	map[14]: type Memory, range 64, base 0x97904000, size 14, enabled
pcib4: requested memory range 0x97904000-0x97907fff: good
pcib0: matched entry for 0.4.INTB
pcib0: slot 4 INTB hardwired to IRQ 35
pcib4: slot 0 INTB is routed to irq 35
Qlogic ISP Driver, FreeBSD Version 7.0, Core Version 6.0
isp0: <Qlogic ISP 2432 PCI FC-AL Adapter> port 0x1200-0x12ff mem 0x97900000-0x97903fff irq 25 at device 0.0 on pci26
isp0: using Memory space register mapping
isp0: set PCI latency to 64
isp0: attempting to allocate 1 MSI vectors (16 supported)
msi: routing MSI IRQ 258 to local APIC 0 vector 80
isp0: using IRQ 258 for MSI
isp0: [MPSAFE]
isp0: [ITHREAD]
isp0: Board Type 2422, Chip Revision 0x3, resident F/W Revision 4.0.27
isp0: 4096 max I/O command limit set
isp0: Chan 0 0x2000001b328feb9e/0x2100001b328feb9e Role Initiator
isp1: <Qlogic ISP 2432 PCI FC-AL Adapter> port 0x1000-0x10ff mem 0x97904000-0x97907fff irq 35 at device 0.1 on pci26
isp1: using Memory space register mapping
isp1: set PCI latency to 64
isp1: attempting to allocate 1 MSI vectors (16 supported)
msi: routing MSI IRQ 259 to local APIC 0 vector 96
isp1: using IRQ 259 for MSI
isp1: [MPSAFE]
isp1: [ITHREAD]
isp1: Board Type 2422, Chip Revision 0x3, resident F/W Revision 4.0.27
isp1: 4096 max I/O command limit set
isp1: Chan 0 0x2000001b32afeb9e/0x2101001b32afeb9e Role Initiator
pcib5: <PCI-PCI bridge> irq 26 at device 5.0 on pci0
pcib5:   domain            0
pcib5:   secondary bus     31
pcib5:   subordinate bus   35
pcib5:   I/O decode        0x0-0x0
pcib5:   no prefetched decode
pci31: <PCI bus> on pcib5
pci31: domain=0, physical bus=31
pcib6: <ACPI PCI-PCI bridge> irq 30 at device 7.0 on pci0
pcib6:   domain            0
pcib6:   secondary bus     16
pcib6:   subordinate bus   20
pcib6:   I/O decode        0xf000-0xfff
pcib6:   memory decode     0x92000000-0x95ffffff
pcib6:   no prefetched decode
pcib6: could not get PCI interrupt routing table for \\_SB_.PCI0.ETH1 - AE_NOT_FOUND
pci16: <ACPI PCI bus> on pcib6
pci16: domain=0, physical bus=16
found->	vendor=0x14e4, dev=0x163a, revid=0x20
	domain=0, bus=16, slot=0, func=0
	class=02-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0046, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 3  supports D0 D3  current D0
	MSI supports 16 messages, 64 bit
	MSI-X supports 9 messages in map 0x10
	map[10]: type Memory, range 64, base 0x92000000, size 25, enabled
pcib6: requested memory range 0x92000000-0x93ffffff: good
pcib0: matched entry for 0.7.INTA
pcib0: slot 7 INTA hardwired to IRQ 30
pcib6: slot 0 INTA is routed to irq 30
found->	vendor=0x14e4, dev=0x163a, revid=0x20
	domain=0, bus=16, slot=0, func=1
	class=02-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0046, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=10
	powerspec 3  supports D0 D3  current D0
	MSI supports 16 messages, 64 bit
	MSI-X supports 9 messages in map 0x10
	map[10]: type Memory, range 64, base 0x94000000, size 25, enabled
pcib6: requested memory range 0x94000000-0x95ffffff: good
pcib0: matched entry for 0.7.INTB
pcib0: slot 7 INTB hardwired to IRQ 37
pcib6: slot 0 INTB is routed to irq 37
bce0: <Broadcom NetXtreme II BCM5709 1000Base-SX (C0)> mem 0x92000000-0x93ffffff irq 30 at device 0.0 on pci16
bce0: attempting to allocate 1 MSI vectors (16 supported)
msi: routing MSI IRQ 260 to local APIC 0 vector 112
bce0: using IRQ 260 for MSI
miibus2: <MII bus> on bce0
brgphy2: <BCM5709S 1000/2500baseSX PHY> PHY 2 on miibus2
brgphy2: OUI 0x0050ef, model 0x003f, rev. 0
brgphy2:  1000baseSX-FDX, auto
bce0: bpf attached
bce0: Ethernet address: 00:21:5e:98:f6:6c
bce0: [MPSAFE]
bce0: [ITHREAD]
bce0: ASIC (0x57092000); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.0.6); Flags (MSI|MFW); MFW (NCSI 2.0.3)
bce1: <Broadcom NetXtreme II BCM5709 1000Base-SX (C0)> mem 0x94000000-0x95ffffff irq 37 at device 0.1 on pci16
bce1: attempting to allocate 1 MSI vectors (16 supported)
msi: routing MSI IRQ 261 to local APIC 0 vector 144
bce1: using IRQ 261 for MSI
miibus3: <MII bus> on bce1
brgphy3: <BCM5709S 1000/2500baseSX PHY> PHY 2 on miibus3
brgphy3: OUI 0x0050ef, model 0x003f, rev. 0
brgphy3:  1000baseSX-FDX, auto
bce1: bpf attached
bce1: Ethernet address: 00:21:5e:98:f6:6e
bce1: [MPSAFE]
bce1: [ITHREAD]
bce1: ASIC (0x57092000); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.0.6); Flags (MSI|MFW); MFW (NCSI 2.0.3)
pcib7: <PCI-PCI bridge> irq 31 at device 8.0 on pci0
pcib7:   domain            0
pcib7:   secondary bus     36
pcib7:   subordinate bus   40
pcib7:   I/O decode        0x0-0x0
pcib7:   no prefetched decode
pci36: <PCI bus> on pcib7
pci36: domain=0, physical bus=36
pcib8: <PCI-PCI bridge> irq 32 at device 9.0 on pci0
pcib8:   domain            0
pcib8:   secondary bus     41
pcib8:   subordinate bus   45
pcib8:   I/O decode        0x0-0x0
pcib8:   no prefetched decode
pci41: <PCI bus> on pcib8
pci41: domain=0, physical bus=41
pci0: <base peripheral, interrupt controller> at device 16.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 16.1 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 17.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 17.1 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.1 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.2 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.3 (no driver attached)
pci0: <base peripheral> at device 22.0 (no driver attached)
pci0: <base peripheral> at device 22.1 (no driver attached)
pci0: <base peripheral> at device 22.2 (no driver attached)
pci0: <base peripheral> at device 22.3 (no driver attached)
pci0: <base peripheral> at device 22.4 (no driver attached)
pci0: <base peripheral> at device 22.5 (no driver attached)
pci0: <base peripheral> at device 22.6 (no driver attached)
pci0: <base peripheral> at device 22.7 (no driver attached)
uhci0: <Intel 82801JI (ICH10) USB controller USB-D> port 0x3080-0x309f irq 22 at device 26.0 on pci0
ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 0 vector 50
uhci0: [MPSAFE]
uhci0: [ITHREAD]
usbus0: <Intel 82801JI (ICH10) USB controller USB-D> on uhci0
ehci0: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> mem 0x97c21400-0x97c217ff irq 16 at device 26.7 on pci0
ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 51
ehci0: [MPSAFE]
ehci0: [ITHREAD]
usbus1: EHCI version 1.0
usbus1: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> on ehci0
pcib9: <PCI-PCI bridge> irq 20 at device 28.0 on pci0
pcib9:   domain            0
pcib9:   secondary bus     1
pcib9:   subordinate bus   5
pcib9:   I/O decode        0x0-0x0
pcib9:   no prefetched decode
pci1: <PCI bus> on pcib9
pci1: domain=0, physical bus=1
pcib10: <PCI-PCI bridge> irq 20 at device 28.4 on pci0
pcib10:   domain            0
pcib10:   secondary bus     6
pcib10:   subordinate bus   10
pcib10:   I/O decode        0xf000-0xfff
pcib10:   memory decode     0x97000000-0x978fffff
pcib10:   prefetched decode 0x96000000-0x96ffffff
pci6: <PCI bus> on pcib10
pci6: domain=0, physical bus=6
found->	vendor=0x101b, dev=0x0452, revid=0x01
	domain=0, bus=6, slot=0, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0047, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x0b (2750 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 3  supports D0 D3  current D0
	MSI supports 2 messages, 64 bit
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 20
pcib10: slot 0 INTA is routed to irq 20
pcib11: <PCI-PCI bridge> irq 20 at device 0.0 on pci6
pcib11:   domain            0
pcib11:   secondary bus     7
pcib11:   subordinate bus   7
pcib11:   I/O decode        0xf000-0xfff
pcib11:   memory decode     0x97000000-0x978fffff
pcib11:   prefetched decode 0x96000000-0x96ffffff
pci7: <PCI bus> on pcib11
pci7: domain=0, physical bus=7
found->	vendor=0x102b, dev=0x0530, revid=0x00
	domain=0, bus=7, slot=0, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0290, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x10 (4000 ns), maxlat=0x20 (8000 ns)
	intpin=a, irq=11
	powerspec 1  supports D0 D3  current D0
	map[10]: type Prefetchable Memory, range 32, base 0x96000000, size 24, enabled
pcib11: requested memory range 0x96000000-0x96ffffff: good
pcib10: requested memory range 0x96000000-0x96ffffff: good
	map[14]: type Memory, range 32, base 0x97800000, size 14, enabled
pcib11: requested memory range 0x97800000-0x97803fff: good
pcib10: requested memory range 0x97800000-0x97803fff: good
	map[18]: type Memory, range 32, base 0x97000000, size 23, enabled
pcib11: requested memory range 0x97000000-0x977fffff: good
pcib10: requested memory range 0x97000000-0x977fffff: good
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 20
pcib10: slot 0 INTA is routed to irq 20
pcib11: slot 0 INTA is routed to irq 20
vgapci0: <VGA-compatible display> mem 0x96000000-0x96ffffff,0x97800000-0x97803fff,0x97000000-0x977fffff irq 20 at device 0.0 on pci7
uhci1: <Intel 82801JI (ICH10) USB controller USB-A> port 0x3060-0x307f irq 17 at device 29.0 on pci0
ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 0 vector 52
uhci1: [MPSAFE]
uhci1: [ITHREAD]
usbus2: <Intel 82801JI (ICH10) USB controller USB-A> on uhci1
uhci2: <Intel 82801JI (ICH10) USB controller USB-B> port 0x3040-0x305f irq 16 at device 29.1 on pci0
uhci2: [MPSAFE]
uhci2: [ITHREAD]
usbus3: <Intel 82801JI (ICH10) USB controller USB-B> on uhci2
uhci3: <Intel 82801JI (ICH10) USB controller USB-C> port 0x3020-0x303f irq 21 at device 29.2 on pci0
ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 0 vector 53
uhci3: [MPSAFE]
uhci3: [ITHREAD]
usbus4: <Intel 82801JI (ICH10) USB controller USB-C> on uhci3
ehci1: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> mem 0x97c21000-0x97c213ff irq 17 at device 29.7 on pci0
ehci1: [MPSAFE]
ehci1: [ITHREAD]
usbus5: EHCI version 1.0
usbus5: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> on ehci1
pcib12: <PCI-PCI bridge> at device 30.0 on pci0
pcib12:   domain            0
pcib12:   secondary bus     46
pcib12:   subordinate bus   50
pcib12:   I/O decode        0x0-0x0
pcib12:   no prefetched decode
pcib12:   Subtractively decoded bridge.
pci46: <PCI bus> on pcib12
pci46: domain=0, physical bus=46
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock (resolution 1000000us)
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 54
uart0: [FILTER]
uart0: fast interrupt
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 0 vector 55
uart1: [FILTER]
uart1: fast interrupt
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est0: Invalid id16 (set, cur) = (16, 17)
est0: Can't check freq 2128, it may be invalid
est0: Invalid id16 (set, cur) = (15, 17)
est0: Can't check freq 1995, it may be invalid
est0: Invalid id16 (set, cur) = (14, 17)
est0: Can't check freq 1862, it may be invalid
est0: Invalid id16 (set, cur) = (13, 17)
est0: Can't check freq 1729, it may be invalid
est0: Invalid id16 (set, cur) = (12, 17)
est0: Can't check freq 1596, it may be invalid
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est1: Invalid id16 (set, cur) = (16, 17)
est1: Can't check freq 2128, it may be invalid
est1: Invalid id16 (set, cur) = (15, 17)
est1: Can't check freq 1995, it may be invalid
est1: Invalid id16 (set, cur) = (14, 17)
est1: Can't check freq 1862, it may be invalid
est1: Invalid id16 (set, cur) = (13, 17)
est1: Can't check freq 1729, it may be invalid
est1: Invalid id16 (set, cur) = (12, 17)
est1: Can't check freq 1596, it may be invalid
p4tcc1: <CPU Frequency Thermal Control> on cpu1
cpu2: <ACPI CPU> on acpi0
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est2: Invalid id16 (set, cur) = (16, 17)
est2: Can't check freq 2128, it may be invalid
est2: Invalid id16 (set, cur) = (15, 17)
est2: Can't check freq 1995, it may be invalid
est2: Invalid id16 (set, cur) = (14, 17)
est2: Can't check freq 1862, it may be invalid
est2: Invalid id16 (set, cur) = (13, 17)
est2: Can't check freq 1729, it may be invalid
est2: Invalid id16 (set, cur) = (12, 17)
est2: Can't check freq 1596, it may be invalid
p4tcc2: <CPU Frequency Thermal Control> on cpu2
cpu3: <ACPI CPU> on acpi0
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est3: Invalid id16 (set, cur) = (16, 17)
est3: Can't check freq 2128, it may be invalid
est3: Invalid id16 (set, cur) = (15, 17)
est3: Can't check freq 1995, it may be invalid
est3: Invalid id16 (set, cur) = (14, 17)
est3: Can't check freq 1862, it may be invalid
est3: Invalid id16 (set, cur) = (13, 17)
est3: Can't check freq 1729, it may be invalid
est3: Invalid id16 (set, cur) = (12, 17)
est3: Can't check freq 1596, it may be invalid
p4tcc3: <CPU Frequency Thermal Control> on cpu3
cpu4: <ACPI CPU> on acpi0
est4: <Enhanced SpeedStep Frequency Control> on cpu4
est4: Invalid id16 (set, cur) = (16, 17)
est4: Can't check freq 2128, it may be invalid
est4: Invalid id16 (set, cur) = (15, 17)
est4: Can't check freq 1995, it may be invalid
est4: Invalid id16 (set, cur) = (14, 17)
est4: Can't check freq 1862, it may be invalid
est4: Invalid id16 (set, cur) = (13, 17)
est4: Can't check freq 1729, it may be invalid
est4: Invalid id16 (set, cur) = (12, 17)
est4: Can't check freq 1596, it may be invalid
p4tcc4: <CPU Frequency Thermal Control> on cpu4
cpu5: <ACPI CPU> on acpi0
est5: <Enhanced SpeedStep Frequency Control> on cpu5
est5: Invalid id16 (set, cur) = (16, 17)
est5: Can't check freq 2128, it may be invalid
est5: Invalid id16 (set, cur) = (15, 17)
est5: Can't check freq 1995, it may be invalid
est5: Invalid id16 (set, cur) = (14, 17)
est5: Can't check freq 1862, it may be invalid
est5: Invalid id16 (set, cur) = (13, 17)
est5: Can't check freq 1729, it may be invalid
est5: Invalid id16 (set, cur) = (12, 17)
est5: Can't check freq 1596, it may be invalid
p4tcc5: <CPU Frequency Thermal Control> on cpu5
cpu6: <ACPI CPU> on acpi0
est6: <Enhanced SpeedStep Frequency Control> on cpu6
est6: Invalid id16 (set, cur) = (16, 17)
est6: Can't check freq 2128, it may be invalid
est6: Invalid id16 (set, cur) = (15, 17)
est6: Can't check freq 1995, it may be invalid
est6: Invalid id16 (set, cur) = (14, 17)
est6: Can't check freq 1862, it may be invalid
est6: Invalid id16 (set, cur) = (13, 17)
est6: Can't check freq 1729, it may be invalid
est6: Invalid id16 (set, cur) = (12, 17)
est6: Can't check freq 1596, it may be invalid
p4tcc6: <CPU Frequency Thermal Control> on cpu6
cpu7: <ACPI CPU> on acpi0
est7: <Enhanced SpeedStep Frequency Control> on cpu7
est7: Invalid id16 (set, cur) = (16, 17)
est7: Can't check freq 2128, it may be invalid
est7: Invalid id16 (set, cur) = (15, 17)
est7: Can't check freq 1995, it may be invalid
est7: Invalid id16 (set, cur) = (14, 17)
est7: Can't check freq 1862, it may be invalid
est7: Invalid id16 (set, cur) = (13, 17)
est7: Can't check freq 1729, it may be invalid
est7: Invalid id16 (set, cur) = (12, 17)
est7: Can't check freq 1596, it may be invalid
p4tcc7: <CPU Frequency Thermal Control> on cpu7
cpu8: <ACPI CPU> on acpi0
est8: <Enhanced SpeedStep Frequency Control> on cpu8
est8: Invalid id16 (set, cur) = (16, 17)
est8: Can't check freq 2128, it may be invalid
est8: Invalid id16 (set, cur) = (15, 17)
est8: Can't check freq 1995, it may be invalid
est8: Invalid id16 (set, cur) = (14, 17)
est8: Can't check freq 1862, it may be invalid
est8: Invalid id16 (set, cur) = (13, 17)
est8: Can't check freq 1729, it may be invalid
est8: Invalid id16 (set, cur) = (12, 17)
est8: Can't check freq 1596, it may be invalid
p4tcc8: <CPU Frequency Thermal Control> on cpu8
cpu9: <ACPI CPU> on acpi0
est9: <Enhanced SpeedStep Frequency Control> on cpu9
est9: Invalid id16 (set, cur) = (16, 17)
est9: Can't check freq 2128, it may be invalid
est9: Invalid id16 (set, cur) = (15, 17)
est9: Can't check freq 1995, it may be invalid
est9: Invalid id16 (set, cur) = (14, 17)
est9: Can't check freq 1862, it may be invalid
est9: Invalid id16 (set, cur) = (13, 17)
est9: Can't check freq 1729, it may be invalid
est9: Invalid id16 (set, cur) = (12, 17)
est9: Can't check freq 1596, it may be invalid
p4tcc9: <CPU Frequency Thermal Control> on cpu9
cpu10: <ACPI CPU> on acpi0
est10: <Enhanced SpeedStep Frequency Control> on cpu10
est10: Invalid id16 (set, cur) = (16, 17)
est10: Can't check freq 2128, it may be invalid
est10: Invalid id16 (set, cur) = (15, 17)
est10: Can't check freq 1995, it may be invalid
est10: Invalid id16 (set, cur) = (14, 17)
est10: Can't check freq 1862, it may be invalid
est10: Invalid id16 (set, cur) = (13, 17)
est10: Can't check freq 1729, it may be invalid
est10: Invalid id16 (set, cur) = (12, 17)
est10: Can't check freq 1596, it may be invalid
p4tcc10: <CPU Frequency Thermal Control> on cpu10
cpu11: <ACPI CPU> on acpi0
est11: <Enhanced SpeedStep Frequency Control> on cpu11
est11: Invalid id16 (set, cur) = (16, 17)
est11: Can't check freq 2128, it may be invalid
est11: Invalid id16 (set, cur) = (15, 17)
est11: Can't check freq 1995, it may be invalid
est11: Invalid id16 (set, cur) = (14, 17)
est11: Can't check freq 1862, it may be invalid
est11: Invalid id16 (set, cur) = (13, 17)
est11: Can't check freq 1729, it may be invalid
est11: Invalid id16 (set, cur) = (12, 17)
est11: Can't check freq 1596, it may be invalid
p4tcc11: <CPU Frequency Thermal Control> on cpu11
cpu12: <ACPI CPU> on acpi0
est12: <Enhanced SpeedStep Frequency Control> on cpu12
est12: Invalid id16 (set, cur) = (16, 17)
est12: Can't check freq 2128, it may be invalid
est12: Invalid id16 (set, cur) = (15, 17)
est12: Can't check freq 1995, it may be invalid
est12: Invalid id16 (set, cur) = (14, 17)
est12: Can't check freq 1862, it may be invalid
est12: Invalid id16 (set, cur) = (13, 17)
est12: Can't check freq 1729, it may be invalid
est12: Invalid id16 (set, cur) = (12, 17)
est12: Can't check freq 1596, it may be invalid
p4tcc12: <CPU Frequency Thermal Control> on cpu12
cpu13: <ACPI CPU> on acpi0
est13: <Enhanced SpeedStep Frequency Control> on cpu13
est13: Invalid id16 (set, cur) = (16, 17)
est13: Can't check freq 2128, it may be invalid
est13: Invalid id16 (set, cur) = (15, 17)
est13: Can't check freq 1995, it may be invalid
est13: Invalid id16 (set, cur) = (14, 17)
est13: Can't check freq 1862, it may be invalid
est13: Invalid id16 (set, cur) = (13, 17)
est13: Can't check freq 1729, it may be invalid
est13: Invalid id16 (set, cur) = (12, 17)
est13: Can't check freq 1596, it may be invalid
p4tcc13: <CPU Frequency Thermal Control> on cpu13
cpu14: <ACPI CPU> on acpi0
est14: <Enhanced SpeedStep Frequency Control> on cpu14
est14: Invalid id16 (set, cur) = (16, 17)
est14: Can't check freq 2128, it may be invalid
est14: Invalid id16 (set, cur) = (15, 17)
est14: Can't check freq 1995, it may be invalid
est14: Invalid id16 (set, cur) = (14, 17)
est14: Can't check freq 1862, it may be invalid
est14: Invalid id16 (set, cur) = (13, 17)
est14: Can't check freq 1729, it may be invalid
est14: Invalid id16 (set, cur) = (12, 17)
est14: Can't check freq 1596, it may be invalid
p4tcc14: <CPU Frequency Thermal Control> on cpu14
cpu15: <ACPI CPU> on acpi0
est15: <Enhanced SpeedStep Frequency Control> on cpu15
est15: Invalid id16 (set, cur) = (16, 17)
est15: Can't check freq 2128, it may be invalid
est15: Invalid id16 (set, cur) = (15, 17)
est15: Can't check freq 1995, it may be invalid
est15: Invalid id16 (set, cur) = (14, 17)
est15: Can't check freq 1862, it may be invalid
est15: Invalid id16 (set, cur) = (13, 17)
est15: Can't check freq 1729, it may be invalid
est15: Invalid id16 (set, cur) = (12, 17)
est15: Can't check freq 1596, it may be invalid
p4tcc15: <CPU Frequency Thermal Control> on cpu15
acpi0: wakeup code va 0xffffff839823d000 pa 0x4000
ex_isa_identify()
ahc_isa_probe 0: ioport 0xc00 alloc failed
isa_probe_children: disabling PnP devices
atrtc: atrtc0 already exists; skipping it
sc: sc0 already exists; skipping it
uart: uart0 already exists; skipping it
uart: uart1 already exists; skipping it
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xca800-0xd8fff on isa0
atkbd: the current kbd controller command byte 004d
atkbd: keyboard ID 0xffffffff (1)
atkbd: failed to reset the keyboard.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
kbd0: atkbd0, AT 84 (1), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 57
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: current command byte:004d
psm0: failed to reset the aux device.
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
ppc0: cannot reserve I/O port range
ppc0: <Parallel port> failed to probe at irq 7 on isa0
isa_probe_children: probing PnP devices
Device configuration finished.
Reducing kern.maxvnodes 2036320 -> 100000
procfs registered
lapic: Divisor 2, Frequency 66669436 Hz
RTC BIOS diagnostic error 80<clock_battery>
Timecounter "TSC" frequency 2266760848 Hz quality -100
Timecounters tick every 1.000 msec
vlan: initialized, using hash tables with chaining
lo0: bpf attached
hptrr: no controller detected.
isp0: Chan 0 Firmware State <Config Wait->Loss Of Sync>
isp1: Chan 0 Firmware State <Config Wait->Loss Of Sync>
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 480Mbps High Speed USB v2.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
uhub0: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
isp0: Chan 0 Firmware State <Config Wait->Loss Of Sync>
isp1: Chan 0 Firmware State <Config Wait->Loss Of Sync>
isp0: Chan 0 Firmware State <Config Wait->Loss Of Sync>
(probe63:mpt0:1:0:0): error 22
(probe63:mpt0:1:0:0): Unretryable Error
(probe64:mpt0:1:1:0): error 22
(probe64:mpt0:1:1:0): Unretryable Error
(probe65:mpt0:1:2:0): error 22
(probe65:mpt0:1:2:0): Unretryable Error
(probe66:mpt0:1:3:0): error 22
(probe66:mpt0:1:3:0): Unretryable Error
(probe67:mpt0:1:4:0): error 22
(probe67:mpt0:1:4:0): Unretryable Error
(probe68:mpt0:1:5:0): error 22
(probe68:mpt0:1:5:0): Unretryable Error
(probe69:mpt0:1:6:0): error 22
(probe69:mpt0:1:6:0): Unretryable Error
(probe70:mpt0:1:7:0): error 22
(probe70:mpt0:1:7:0): Unretryable Error
(probe71:mpt0:1:8:0): error 22
(probe71:mpt0:1:8:0): Unretryable Error
(probe72:mpt0:1:9:0): error 22
(probe72:mpt0:1:9:0): Unretryable Error
(probe73:mpt0:1:10:0): error 22
(probe73:mpt0:1:10:0): Unretryable Error
(probe74:mpt0:1:11:0): error 22
(probe74:mpt0:1:11:0): Unretryable Error
(probe75:mpt0:1:12:0): error 22
(probe75:mpt0:1:12:0): Unretryable Error
(probe76:mpt0:1:13:0): error 22
(probe76:mpt0:1:13:0): Unretryable Error
isp1: Chan 0 Firmware State <Config Wait->Loss Of Sync>
uhub1: 6 ports with 6 removable, self powered
uhub5: 6 ports with 6 removable, self powered
isp0: Chan 0 Firmware State <Config Wait->Loss Of Sync>
isp1: Chan 0 Firmware State <Config Wait->Loss Of Sync>
isp0: Chan 0 Firmware State <Config Wait->Loss Of Sync>
ugen5.2: <vendor 0x04b4> at usbus5
uhub6: <vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/0.07, addr 2> on usbus5
isp1: Chan 0 Firmware State <Config Wait->Loss Of Sync>
isp0: Chan 0 Firmware State <Config Wait->Loss Of Sync>
isp1: Chan 0 Firmware State <Config Wait->Loss Of Sync>
da0 at mpt0 bus 0 scbus0 target 1 lun 0
da0: <IBM-ESXS CBRCA300C3ETS0 N C274> Fixed Direct Access SCSI-6 device 
da0: Serial Number         PDVNW70E
da0: 300.000MB/s transfers
da0: Command Queueing enabled
da0: 286102MB (585937500 512 byte sectors: 255H 63S/T 36472C)
da1 at mpt0 bus 0 scbus0 target 2 lun 0
da1: <IBM-ESXS CBRCA300C3ETS0 N C274> Fixed Direct Access SCSI-6 device 
da1: Serial Number         PDVMJ3WE
da1: 300.000MB/s transfers
da1: Command Queueing enabled
da1: 286102MB (585937500 512 byte sectors: 255H 63S/T 36472C)
GEOM: new disk da0
GEOM: new disk da1
pass0 at mpt0 bus 0 scbus0 target 1 lun 0
pass0: <IBM-ESXS CBRCA300C3ETS0 N C274> Fixed Direct Access SCSI-6 device 
pass0: Serial Number         PDVNW70E
pass0: 300.000MB/s transfers
pass0: Command Queueing enabled
pass1 at mpt0 bus 0 scbus0 target 2 lun 0
pass1: <IBM-ESXS CBRCA300C3ETS0 N C274> Fixed Direct Access SCSI-6 device 
pass1: Serial Number         PDVMJ3WE
pass1: 300.000MB/s transfers
pass1: Command Queueing enabled
ATA PseudoRAID loaded
SMP: AP CPU #1 Launched!
cpu1 AP:
     ID: 0x01000000   VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
SMP: AP CPU #10 Launched!
cpu10 AP:
     ID: 0x12000000   VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
SMP: AP CPU #2 Launched!
cpu2 AP:
     ID: 0x02000000   VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
SMP: AP CPU #11 Launched!
cpu11 AP:
     ID: 0x13000000   VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
SMP: AP CPU #7 Launched!
cpu7 AP:
     ID: 0x07000000   VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
SMP: AP CPU #8 Launched!
cpu8 AP:
     ID: 0x10000000   VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
SMP: AP CPU #6 Launched!
cpu6 AP:
     ID: 0x06000000   VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
SMP: AP CPU #13 Launched!
cpu13 AP:
     ID: 0x15000000   VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
SMP: AP CPU #4 Launched!
cpu4 AP:
     ID: 0x04000000   VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
SMP: AP CPU #15 Launched!
cpu15 AP:
     ID: 0x17000000   VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
SMP: AP CPU #3 Launched!
cpu3 AP:
     ID: 0x03000000   VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
SMP: AP CPU #12 Launched!
cpu12 AP:
     ID: 0x14000000   VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
SMP: AP CPU #5 Launched!
cpu5 AP:
     ID: 0x05000000   VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
SMP: AP CPU #14 Launched!
cpu14 AP:
     ID: 0x16000000   VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
SMP: AP CPU #9 Launched!
cpu9 AP:
     ID: 0x11000000   VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 1 vector 48
ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 2 vector 48
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 3 vector 48
ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 4 vector 48
ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 5 vector 48
ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 6 vector 48
ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 7 vector 48
ioapic1: routing intpin 4 (PCI IRQ 28) to lapic 16 vector 48
msi: Assigning MSI IRQ 256 to local APIC 17 vector 48
msi: Assigning MSI IRQ 257 to local APIC 18 vector 48
msi: Assigning MSI IRQ 258 to local APIC 19 vector 48
msi: Assigning MSI IRQ 259 to local APIC 20 vector 48
msi: Assigning MSI IRQ 260 to local APIC 21 vector 48
msi: Assigning MSI IRQ 261 to local APIC 22 vector 48
uhub6: 2 ports with 2 removable, self powered
Root mount waiting for: usbus5
ugen0.2: <IBM> at usbus0
ugen2.2: <IBM> at usbus2
ukbd0: <HID KB> on usbus2
kbd2 at ukbd0
kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000
ums0: <HID MS> on usbus2
ums0: 3 buttons and [XYZ] coordinates ID=0
ugen5.3: <vendor 0x04b4> at usbus5
uhub7: <vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/0.07, addr 3> on usbus5
uhub7: 4 ports with 4 removable, self powered
ugen5.4: <IBM> at usbus5
umass0: <USBMSC> on usbus5
umass0:  SCSI over Bulk-Only; quirks = 0x0000
Root mount waiting for: usbus5
umass0:4:0:-1: Attached to scbus4
(probe0:umass-sim0:0:0:0): Down reving Protocol Version from 2 to 0?
pass2 at umass-sim0 bus 0 scbus4 target 0 lun 0
pass2: <IBM Remote Disk 1000> Removable Direct Access SCSI-0 device 
pass2: Serial Number 0000000020001
pass2: 40.000MB/s transfers
GEOM: new disk da2
da2 at umass-sim0 bus 0 scbus4 target 0 lun 0
da2: <IBM Remote Disk 1000> Removable Direct Access SCSI-0 device 
da2: Serial Number 0000000020001
da2: 40.000MB/s transfers
da2: 1MB (2880 512 byte sectors: 64H 32S/T 1C)
(probe0:umass-sim0:0:0:1): Down reving Protocol Version from 2 to 0?
ugen5.5: <vendor 0x04b4> at usbus5
uhub8: <vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/0.07, addr 5> on usbus5
(probe0:umass-sim0:0:0:1): TEST UNIT READY. CDB: 0 20 0 0 0 0 
(probe0:umass-sim0:0:0:1): CAM Status: SCSI Status Error
(probe0:umass-sim0:0:0:1): SCSI Status: Check Condition
(probe0:umass-sim0:0:0:1): NOT READY asc:3a,0
(probe0:umass-sim0:0:0:1): Medium not present
(probe0:umass-sim0:0:0:1): (probe0:umass-sim0:0:0:1): TEST UNIT READY. CDB: 0 20 0 0 0 0 
(probe0:umass-sim0:0:0:1): NOT READY asc:3a,0
(probe0:umass-sim0:0:0:1): Medium not present
Unretryable error
(probe0:umass-sim0:0:0:1): error 6
(probe0:umass-sim0:0:0:1): Unretryable Error
pass3 at umass-sim0 bus 0 scbus4 target 0 lun 1
pass3: <KVM vmDisk-CD 0.01> Removable CD-ROM SCSI-0 device 
pass3: Serial Number 0000000020001
pass3: 40.000MB/s transfers
(cd0:umass-sim0:0:0:1): error 6
(cd0:umass-sim0:0:0:1): Unretryable Error
cd0 at umass-sim0 bus 0 scbus4 target 0 lun 1
cd0: <KVM vmDisk-CD 0.01> Removable CD-ROM SCSI-0 device 
cd0: Serial Number 0000000020001
cd0: 40.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
uhub8: 4 ports with 4 removable, self powered
ugen5.6: <Cypress Semiconductor> at usbus5
umass1: <Cypress Semiconductor USB2.0 Storage Device, class 0/0, rev 2.00/0.01, addr 6> on usbus5
umass1:  SCSI over Bulk-Only; quirks = 0x4100
umass1:5:1:-1: Attached to scbus5
(probe0:umass-sim1:1:0:0): error 22
(probe0:umass-sim1:1:0:0): Unretryable Error
(probe0:umass-sim1:1:0:0): Down reving Protocol Version from 2 to 0?
(probe0:umass-sim1:1:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 
(probe0:umass-sim1:1:0:0): CAM Status: SCSI Status Error
(probe0:umass-sim1:1:0:0): SCSI Status: Check Condition
(probe0:umass-sim1:1:0:0): UNIT ATTENTION asc:29,0
(probe0:umass-sim1:1:0:0): Power on, reset, or bus device reset occurred
(probe0:umass-sim1:1:0:0): (probe0:umass-sim1:1:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 
(probe0:umass-sim1:1:0:0): UNIT ATTENTION asc:29,0
(probe0:umass-sim1:1:0:0): Power on, reset, or bus device reset occurred
Retrying Command (per Sense Data)
(probe0:umass-sim1:1:0:0): Retrying Command
pass4 at umass-sim1 bus 1 scbus5 target 0 lun 0
pass4: <MATSHITA DVD-ROM UJDA780 DA21> Removable CD-ROM SCSI-0 device 
pass4: 40.000MB/s transfers
cd1 at umass-sim1 bus 1 scbus5 target 0 lun 0
cd1: <MATSHITA DVD-ROM UJDA780 DA21> Removable CD-ROM SCSI-0 device 
cd1: 40.000MB/s transfers
cd1: cd present [301473 x 2048 byte records]
GEOM: new disk cd0
GEOM: new disk cd1
(cd0:umass-sim0:0:0:1): error 22
(cd0:umass-sim0:0:0:1): Unretryable Error
(cd0:umass-sim0:0:0:1): error 6
(cd0:umass-sim0:0:0:1): Unretryable Error
(cd0:umass-sim0:0:0:1): error 22
(cd0:umass-sim0:0:0:1): Unretryable Error
(cd0:umass-sim0:0:0:1): error 6
(cd0:umass-sim0:0:0:1): Unretryable Error
Trying to mount root from ufs:/dev/da0s1a
ct_to_ts([2010-01-21 13:42:45]) = 1264081365.000000000
start_init: trying /sbin/init
bge0: link UP
bge1: link UP
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, rule-based forwarding disabled, default to deny, logging disabled
ipfw0: bpf attached